ELECTRIC BLUE ACRYLIC COLOR FOR PROFESSIONAL AIRBRUSH AND CUSTOM PAINT ART
These color are considered the best of the best from Italian water base technology. Perfect if used with all airbrush Micron series or not, Incredible results if used with airbrush or spray gun.
- Ready to use
- Super bright new generation pigments
- Can be diluted as desired
- Super opaque
- Stable at high pressures
- Extra fluid for super thin lines
- Fast drying
- Completely non-toxic
- Can also be diluted with demineralized water
- Can also be used with professional spray guns
READY TO USE ???
Kustomservice acrylic water colors are ready to use for 0,18-0,2-0,3-0,4 and all other airbrush. They are also non-toxic.
Ready to use means that you can use them without diluting to color a piece, even to create shades but if you want perfect and soft shades, the colors must be diluted with our REDUCER as you like. Obviously we recommend not to overdose it because, more you dilute a color more unstable it becomes.
If you use airbrushes with 0.18 heads like Iwata custom microns you can dilute it up to 200%
TRANSPARENCY AND COVERAGE
The colors are all opaque. If we want to convert them into transparent, we must dilute them with COLOR BLENDER, thanks this you can change the color into transparent paint and finally you'll never lose the stability.
MOST IMPORTANT: a color that become transparent is not a candy. Candy color are completely different technology and effect.
HOW DOES IT APPLY?
The best way is to proceed with light and dry coats. The best way is start with some light layers and after these drying you can give one more ore two wet every 10/15 minutes.
The suggested pressure is between 1.5 and 1.8 bar but it can also works from 1 bar depending on the dilution.
Between the hands you must always wait for the correct dry time, that does not have a precise time, just see that the color becomes opaque and homogeneous. After that you can apply one more until the end of your job.
In the end you must always protect with one of our clearcoat or your clearcoat for professionals but remember to make a test to be sure that the color and the clear paint are compatible.
COLOR PROTECTION AND FINISHING
These water base colors are professional
CAN BE MIX TOGETHER?
YES sure, all water colors can be mixed together even if they are of different families. Pearls with pastel, metals with pearls etc. etc.
Just be careful that the chemical base is the same ONLY PURE WATER BASE
For example, chromates cannot be mixed with normal colors because chrome paint is alcohol-based while colors are pure water-based.
Always clean with our specific cleaners. In this case you need the water cleaner.
MORE INFO AT email@example.com