SUPER GLOSSY BLACK WATER-BASED PAINT WITH HIGH CHEMICAL RESISTANCE READY TO USE.
KSW100 BLACK super gloss is a water based color for airbrush that has two main characteristics
This color is not a primer, is just a glossy color base
It must be applied over a black primer
It is extremely shiny when compared to the products commonly found on the market
Can be used alone as a glossy black finish or as a glossy black base for laying metallic effect colors.
Is not necessary dilute it because it is ready to use for 0,3 nozle airbrush.
This color can be dilute simply by adding common distilled water.
It is absolutely not recommended to dilute with our thinners or reducers of other brands.
Airbrush with 0.3 nozle. If a 0.2 is used, color must be dilute to a maximum of 5% but the color loose a part of his glossy power.
Brush: it is not impossible to use the brush but it is recommended to use it only on very small pieces.
Always recommended 2 bar except when working on very small components for which a pressure of 1.5 bar can also be used
Use this color as it is, is not necessary dilute it but if you want dilute not to much than 5% with distilled water.
We suggest (but it is not obligatory and the technique may vary according to your experience):
Apply a light coat, wait 5 minutes and apply a first wet coat. After 5 minutes apply a second wet coat and wait 12 hours for a touch free.
The important thing at the end of the application is to have a mirror-like glossy effect.
12 hours for a correct touch free
72 hours for a complete dry
wait 72 hours before buffing and polishing.
NOTE: wet coat means a compact hand with a mirror effect.
Clean the airbrush with our water-based paint cleaner, if you don't have the cleaner, you can adjust with tap water. Other additives not recognized by us can be used but at the discretion of the modeller.
COMPATIBILITY WITH OTHER COLORS OF OTHER BRANDS
This product can be applied both above and below other colors of other brands without probleM
After waiting 72 hours you can polish if you want to remove any defects with our miracle polishing compound.
HUMIDITY AND EXTERNAL TEMPERATURE
For a water based paint the humidity and room temperature is a big big problem so please take care of this.
Don't try to accelerate the dry time, it will become satin not gloss.
LOSS OF DETAILS
Our clear coat never cancel the particular of your models but if you apply too much paint you loose for sure all.