Brake caliper spray paint hi heat resistant 2K 400ml.
IMPORTANT! This paint is 2K so after the activation must be used in 3 or 4 hours maximum. After this time we not guarantee the correct result.
This spray can is different from the common spray because it has the catalyst inside for what this paint is exactly the same of original brake paint.
To use it is very easy.
First of all clean well metal surfaces and remove all oxide or powder or other strange elements.
Now apply our 1K spray primer black or gray with one dry and one wet coat.
After 30 or 40 minutes primer will be dry and we apply the 2K paint
TO use the 2K spray can remove the red button form the top of the cap. Turn the spray can and apply the red button on the bottom and push strong for 4 seconds, now the catalyst is insulate into the paint.
Reverse the spray, remove the red button and shake well one or two minutes.
Apply one dry coat and wait 5 minutes.
Apply one wet coat and wait 5 or 10 minutes.
Apply last wet coat and wait 12 hours to touch the pieces and 72 hours to have the best chemical resistance to fuel or other chemical elements.